Clear AllClose
Your cart is currently empty.
Subtotal
R 0.00

Greenrich - COMMUNICATION WITH GROWATT(SPF 5000 ES , SPF 5000TL HVM - P , SPF 5000TL HVM WPV – P)

    1. COMMUNICATION WITH GROWATT(SPF 5000 ES , SPF 5000TL HVM - P , SPF 5000TL HVM WPV – P)

     

                                                                 

     

    • Connect the battery terminals securely from your batteries to the inverter. Positive (+) from your battery to positive (+) terminal on your inverter, negative (-) from your battery to negative terminal (-) on your inverter.

     

     

     

     

                                                                                           

     

    • If you are using 2 or more batteries connect the positive (+) of the first battery to the positive (+) of the next battery, similarly, connect the negative (-) of the first battery to the negative (-) of the second battery. When connecting your battery to the inverter connect your red (+) cable to the positive terminal of the first battery and your black (-) cable to the negative terminal of your last battery. Remember to connect the communication cable between your batteries.

     

               

     

    For communication between inverter and battery BMS see below communication cable configuration.

     

     

    • Use pin 1 & 2 for RS485 on inverter.
    •  

    Connect the communication cable on the RS485 PORT on the battery (next to CAN port) to the inverters BMS/RS485 port

                                

     

    LCD SETTING ON THE INVERTER

    • First turn on the battery and do all settings on the inverter BEFORE switching on AC INPUT and PV INPUT .

     

    • On the inverter press and hold the ENTER button until a 2-digit number on the right starts flashing. Once flashing use the UP or DOWN arrows to go through the settings. For battery set up go to setting 05.

     

     

     

     

     

     

    • Set the battery type as “Li” in setting 05. After selecting LI press ENTER button and You will be directed to setting 036 which you will be required to input the communication protocol. Enter protocol 02 then press ENTER until you see 036 flashing, u can then press ESC to go back to the main screen.

     

                              

     

    • To verify that your inverter is communicating with your battery on your inverter settings option # 12,13 and 21 will be displaying percentage values .

      

                               

                                                             

     

     

     

     

     

     

     

     

     

             3.2 Use pin 4 & 5 for CAN on inverter


     

    • Connect the communication cable on the CAN PORT on the battery to the inverters BMS/CAN port.

                       

     

    LCD SETTING ON THE INVERTER

    • First turn on the battery and do all settings on the inverter BEFORE switching on AC INPUT and PV INPUT .

     

    • On the inverter press and hold the ENTER button until a 2-digit number on the right starts flashing. Once flashing use the UP or DOWN arrows to go through the settings. For battery set up go to setting 05.

     

     

     

     

     

     

     

    • Set the battery type as “Li” in setting 05. After selecting LI press ENTER button and You will be directed to setting 036 which you will be required to input the communication protocol. Enter protocol 52 then press ENTER until you see 036 flashing, u can then press ESC to go back to the main screen.

     

                         

     

    • To verify that your inverter is communicating with your battery on your inverter settings option # 12,13 and 21 will be displaying percentage values .

     

                             

                                                             

     

Your Wishlist is empty